April/2020 New HPE0-J58 Exam Dumps with PDF and VCE are Free Released Today! Following are some new HPE0-J58 Exam Questions:
New Question
A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.
Which HPE program should you leverage in your solution to help meet the customer’s requirements?
A. HPE Store More Guarantee
B. HPE Nimble Timeless Storage
C. HPE Get Thin Guarantee
D. HPE Get 6-Nines Guarantee
Answer: B
Explanation:
https://www.hpe.com/emea_europe/en/storage/nimble.html
New Question
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
A. HPE Infosight
B. DD Analyzer
C. NinjaCrawler
D. SAF Collect
Answer: C
New Question
A customer has a requirement to provide Disaster Recovery for an application that is very sensitive to IO latency.
The customer has specified an RPO of less than 3 minutes for this application.
How can HPE 3PAR Remote Copy help meet the customers specified requirements?
A. by using Asynchronous Streaming Replication
B. by using Synchronous Replication
C. by using Synchronous Long Distance Mode
D. by using Periodic Asynchronous Replication with an interval of 3 mins
Answer: A
New Question
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than 1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows 2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
A. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
B. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
C. The Quorum Witness initiates the fail-over, passing control to the standby array
D. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
E. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
Answer: AB
New Question
You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses. What should you do to use this feature?
A. Switches must be upgraded to FOS 7.4 or higher
B. Certificates must be obtained from Brocade
C. A Secure Fabric license must be added to all switches in the fabric
D. Certificates must be obtained from a third-party vendor
Answer: A
New Question
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
A. Peer Persistence
B. Serviceguard Metrocluster
C. Cluster Extension (CLX)
D. Site Recovery Manager
Answer: C
Explanation:
https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%20Paper_HPE%20ConvergedSystem%20700.pdf? epslanguage=en
New Question
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer’s specified requirements in the most cost effective manner?
A. by using Periodic Asynchronous Replication with an interval of 15 mins
B. by using Synchronous Long Distance Mode
C. by using Synchronous Replication
D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
New Question
A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.
After replication completed at 1:00pm, the array at the primary site suffers a power failure.
Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed. At
3:00pm, the power was restored to the primary site array.
What does the administrator need to do first to restore services in the primary site?
A. Perform handover from the secondary array to the primary array
B. Create a new replication partnership from the primary array to the secondary array
C. Create a new replication partnership from the secondary array to the primary array
D. Perform a failback of the existing replication partnership to the primary array
Answer: A
New Question
You completed the HPE Nimble storage replication partnership in a customer environment.
When you test the network connection from the primary partner to the secondary partner, the test fails; when you test the connection from the secondary to the primary partner, the test is successful. What
is the most likely cause of the failure?
A. The secondary partner name is not configured properly
B. The secondary array network ports are misconfigured
C. The test can only be performed from the secondary array
D. The primary partner name is not configured properly
Answer: A
New Question
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector. What
should be the next step in your design process?
A. Open the .zip file with NinjaSTARS
B. Import the .zip file into OCA
C. Send the .zip file to [email protected]
D. Upload the .zip file to the SAF Portal
Answer: A
New Question
You are proposing StoreOnce as a new backup target.
Which features should you emphasize that will help the customer protect and recover data from external attacks on local data? (Select two.)
A. StoreOnce Catalyst stores are only accessible via the API
B. StoreOnce has firewalls to protect the repositories
C. StoreOnce is immune from ransomware
D. StoreOnce has malware protection
E. StoreOnce has encryption of data at rest and data in-flight
Answer: CE
New Question
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array data. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is
approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?
A. Asynchronous Streaming
B. Asynchronous Periodic Remote Copy
C. Synchronous Remote Copy
D. Peer Persistence
Answer: B
New Question
A customer is expecting rapid growth of their data storage needs on their HPE Nimble arrays. Which HPE tool should you recommend to best assist with
capacity planning?
A. NinjaStars for Nimble
B. NinjaCrawler
C. InfoSight
D. One Config Advanced
Answer: D
New Question
A customer wants to enable an automated failover for their two existing HPE 3PAR solutions, which are located in two different sites. Each solution has an All-inclusive Single-System Software license. Which
component is required to enable this function?
A. All-inclusive Multi-System Software License
B. Fibre channel Bridges to connect the disk shelfs
C. Additional HPE 3PAR system as quorum witness
D. Dark fibre connection between the sites
Answer: A
New Question
What is one of the advantages of protecting HPE 3PAR File
Persona with RMC?
A. MS SQL data consistency is provided
B. Single file recovery is possible
C. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
D. Backup throughput will be considerably faster than other backup methods
Answer: D
New Question
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
A. Use the advanced performance reports in SSMC
B. Use HPE InfoSight Cross Stack Analytics
C. Use HPE SAF Collect to gather data for SAF Analyze
D. Use Brocade Network Advisor to gather data for analysis
Answer: A
New Question
A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?
A. using a script based on the HPE 3PAR Web Services API
B. using an HPE 3PAR CLI script with the checkupgrade command
C. using the SSMC array configuration reports
D. using the upgrade report tool in HPE InfoSight
Answer: C
New Question
A customer with an existing StoreOnce 5100 appliance needs guidance on determining longterm expected growth of the storage utilization based on actual usage.
However, the customer’s ISV backup software only shows 30 days of historical data.
Which step should be performed to check the StoreOnce 5100 for best practices and allow for growth planning?
A. Register StoreOnce 5100 in the InfoSight portal
B. Perform an HPE NinjaProtected+ assessment
C. Run the DD Analyzer Sizing Tool
D. Run the HPE Storage Sizer tool
Answer: D
New Question
A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)
A. HPE StoreOnce VSA
B. HPE 3PAR
C. HPE Nimble arrays with SmartReplicate (remote replication)
D. HPE StoreOnce hardware appliance
E. any B-series 16Gb SAN Switch
Answer: D,E
New Question
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is 200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
A. The bandwidth is sufficient, and replication must happen every 5 minutes
B. The bandwidth will have to be increased, and replication must happen every 5 minutes
C. The bandwidth will have to be increased, and replication must happen every 10 minutes D. The bandwidth is sufficient, and replication must happen every 10 minutes
Answer: B
New Question
Refer to the exhibit.
A customer has the environment shown. They currently perform application-consistent daily full backups via Veeam backup to an HPE StoreOnce device. These backups are then replicated to an alternate device using Catalyst copy.
Changing business requirements have mandated the RPO and RTO for the customer’s SQL databases
be reduced to 15 minutes. Due to the size of the databases, it is not possible to meet this requirement with their existing backout application.
What should you recommend the customer implement in order to meet their new requirement?
A. SPE StoreOnce Cloud Bank
B. HPE 3PAR Remote Copy in Synchronous Mode
C. HPE RMC Express Protect
D. HPE 3PAR Remote Copy in Asynchronous Streaming Mode
Answer: D
Resources From:
1.2020 Latest Braindump2go HPE0-J58 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/hpe0-j58.html
2.2020 Latest Braindump2go HPE0-J58 PDF and HPE0-J58 VCE Dumps Free Share:
https://drive.google.com/drive/folders/16arpSytXcBrefXAXhLhAs52Wp9B4w1RL?usp=sharing
3.2020 Latest HPE0-J58 Exam Questions from:
https://od.lk/fl/NDZfMTI0Mzg4Ml8
Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!
