MD-100 Exam Dumps MD-100 Exam Questions MD-100 PDF Dumps MD-100 VCE Dumps Microsoft Dumps

[New Questions!]2020/Feb New Braindump2go MD-100 Dumps with PDF and VCE Free Updated

February 27, 2020

February/2020 Braindump2go MD-100 Exam Dumps with PDF and VCE New Updated Today! Following are some new MD-100 Exam Questions!


New Question
You have 200 computers that run Windows 10 and are joined to an Active Directory domain.
You need to enable Windows Remote Management (WinRM) on all the computers by using Group Policy.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.


A.    Set the Startup Type of the Windows Remote Management (WS-Management) service to Automatic.
B.    Enable the Windows Firewall: Allow inbound remote administration exception setting.
C.    Enable the Allow remote server management through WinRM setting.
D.    Enable the Windows Firewall: Allow inbound Remote Desktop exceptions setting.
E.    Enable the Allow Remote Shell access setting.
F.    Set the Startup Type of the Remote Registry service to Automatic.


Answer: ABC
Explanation:
Remote Desktop has nothing to do with WinRM.
https://support.auvik.com/hc/en-us/articles/204424994-How-to-enable-WinRM-with-domain-controller-Group-Policy-for-WMI-monitoring


New Question
A user has a computer that runs Windows 10.
When the user connects the computer to the corporate network, the user cannot access the internal corporate servers. The user can access servers on the Internet. You run the ipconfig command and receive the following output.
  image
You send a ping request and successfully ping the default gateway, the DNS servers, and the DHCP server.
Which configuration on the computer causes the issue?


A.    the DNS servers
B.    the IPv4 address
C.    the subnet mask
D.    the default gateway address


Answer: A


New Question
You have 15 computers that run Windows 10. Each computer has two network interfaces named Interface1 and Interface2.
You need to ensure that network traffic uses Interface1, unless Interface1 is unavailable.
What should you do?


A.    Run the Set-NetIPInterface -InterfaceAlias Interface1 -InterfaceMetric 1 command.
B.    Run the Set-NetAdapterBinding -Name Interface2 -Enabled $true -ComponentID ms_tcpip -TThrottleLimit 0 command.
C.    Set a static IP address on Interface 1.
D.    From Network Connections in Control Pane, modify the Provider Order.


Answer: A
Explanation:
https://tradingtechnologies.atlassian.net/wiki/spaces/KB/pages/27439127/How+to+Change+Network +Adapter+Priorities+in+Windows+10
https://docs.microsoft.com/en-us/powershell/module/nettcpip/set-netipinterface?view=win10-ps


New Question
Your network contains an Active Directory domain. The domain contains 10 computers that run Windows 10. Users in the finance department use the computers.
You have a computer named Computer1 that runs Windows 10.
From Computer1, you plan to run a script that executes Windows PowerShell commands on the finance department computers.
You need to ensure that you can run the PowerShell commands on the finance department from Computer1.
What should you do on the finance department computers?


A.    From the local Group Policy, enable the Allow Remote Shell Access setting.
B.    From the local Group Policy, enable the Turn on Script Execution setting.
C.    From the Windows PowerShell, run the Enable-MMAgent cmdlet.
D.    From the Windows PowerShell, run the Enable-PSRemoting cmdlet.


Answer: D
Explanation:
https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.core/enable-psremoting? view=powershell-6


New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10.
You test Windows updates on Computer1 before you make the updates available to other users at your company.
You install a quality update that conflicts with a customer device driver.
You need to remove the update from Computer1.
Solution: From an elevated command prompt, you run the wusa.exe command and specify the /uninstall parameter.
Does this meet the goal?


A.    Yes
B.    No


Answer: A
Explanation:
https://support.microsoft.com/en-us/help/934307/description-of-the-windows-update-standalone-installer-in-windows


New Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10.
You test Windows updates on Computer1 before you make the updates available to other users at your company.
You install a quality update that conflicts with a customer device driver.
You need to remove the update from Computer1.
Solution: From System Restore, you revert the system state to a restore point that was created before the update was installed.
Does this meet the goal?


A.    Yes
B.    No


Answer: B
Explanation:
https://support.microsoft.com/en-us/help/934307/description-of-the-windows-update-standalone-installer-in-windows


New Question
You have 100 computers that run Windows 10. The computers are in a workgroup.
The computers have a low-bandwidth metered Internet connection.
You need to reduce the amount of Internet bandwidth consumed to download updates.
What should you configure?


A.    BranchCache in hosted mode
B.    BranchCache in distributed cache mode
C.    Delivery Optimization
D.    Background intelligent Transfer Service (BITS)


Answer: C
Explanation:
https://support.microsoft.com/en-us/help/4468254/windows-update-delivery-optimization-faq


New Question
You have 20 computers that run Windows 10.
You configure all the computers to forward all the events from all the logs to a computer named Computer1 that runs Windows 10.
When you sign in to Computer1, you cannot see any security events from other computers. You can see all the other forwarded events from the other computers.
You need to ensure that the security events are forwarded to Computer1.
What should you do?


A.    On each computer, run wecutil ac /q.
B.    On each computer, add the NETWORK SERVICE account to the Event Log Readers group.
C.    On each computer, run winrm qc -q.
D.    On Computer1, add the account of Computer1 to the Event Log Readers group.


Answer: D
Explanation:
https://docs.microsoft.com/en-us/windows/security/threat-protection/use-windows-event-forwarding-to-assist-in-intrusion-detection


New Question
You have a computer that runs Windows 10.
You discover that Windows updates are failing to install on the computer. You need to generate a log file that contains detailed information about the failures.
Which cmdlet should you run?


A.    Get-LogProperties
B.    Get-WindowsErrorReporting
C.    Get-WindowsUpdateLog
D.    Get-WinEvent


Answer: C
Explanation:
https://docs.microsoft.com/en-us/powershell/module/windowsupdate/get-windowsupdatelog?view=win10-ps


New Question
You have a computer that runs Windows 10.
You can start the computer but cannot sign in.
You need to start the computer into the Windows Recovery Environment (WinRE).
What should you do?


A.    Turn off the computer. Turn on the computer, and then press F8.
B.    Turn off the computer. Turn on the computer, and then press F10.
C.    From the sign-in screen, hold the Shift key, and then click Restart.
D.    Hold Alt+Ctrl+Delete for 10 seconds.


Answer: C
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-recovery-environment–windows-re–technical-reference


New Question
Your company purchases 20 laptops that use a new hardware platform.
In a test environment, you deploy Windows 10 to the new laptops.
Some laptops frequently generate stop errors.
You need to identify the cause of the issue.
What should you use?


A.    Reliability Monitor
B.    Task Manager
C.    System Configuration
D.    Performance Monitor


Answer: A
Explanation:
https://lifehacker.com/how-to-troubleshoot-windows-10-with-reliability-monitor-1745624446


New Question
You have a computer named LON-CL1.Adatum.com that runs Windows 10. From Event Viewer, you create a custom view named View1 that has the following filter:
User: User1
Logged: Any time
Event logs: System
Computer: LON-CL1
Event IDs: 10000 – 11000
Event level: Error, Verbose
You open Event Viewer and discover the event shown in the exhibit. (Click the Exhibit tab.)
  image
The event does not appear in View1.
You need to ensure that the event appears in View1.
What should you do?


A.    Add a Task Category setting to the filter.
B.    Add the computer account to the Event Log Readers group.
C.    Create an event subscription.
D.    Modify the Computer setting in the filter.


Answer: A
Explanation:
https://www.techrepublic.com/article/how-to-use-custom-views-in-windows-10s-event-viewer/


Resources from:
https://issuu.com/ruthgriffithfreedumps/docs/_full_version_2020_new_braindump2go_2ba0bf8bbce243


And,


1.2020 Latest Braindump2go MD-100 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/md-100.html

2.2020 Latest Braindump2go MD-100 PDF and MD-100 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1JUVP5MWzD2NVdlAoSATpQirlejY0T0r_?usp=sharing


3.2020 Latest Braindump2go MD-100 PDF and MD-100 VCE Dumps Free Share:
https://od.lk/fl/NDZfMTE3ODI3N18


Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!