[December-2019-New]Braindump2go AZ-300 Dumps with PDF and VCE Free Download

December/2019 Braindump2go AZ-300 Exam Dumps with PDF and VCE New Updated Today! Following are some new AZ-300 Exam Questions,

New Question
You have an Azure subscription that contains three virtual networks named VNet1, VNet2, and VNet3. VNet2 contains a virtual appliance named VM2 that operates as a router.
You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.
You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3.
You need to provide connectivity between VNet1 and VNet3 through VNet2.
Which two configurations should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. On the peering connections, allow forwarded traffic
B. Create a route filter
C. On the peering connections, allow gateway transit
D. Create route tables and assign the table to subnets
E. On the peering, use remote gateways

Answer: CE
Explanation:
Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to allow traffic from the peered virtual network to flow through the gateway.
The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering#requirements-and-constraints

New Question
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning to create a virtual network that has a scale set that contains six virtual machines (VMs).
A monitoring solution on a different network will need access to the VMs inside the scale set.
You need to define public access to the VMs.
Solution: Deploy a standalone VM that has a public IP address to the virtual network.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

New Question
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning to create a virtual network that has a scale set that contains six virtual machines (VMs).
A monitoring solution on a different network will need access to the VMs inside the scale set.
You need to define public access to the VMs.
Solution: Implement an Azure Load Balancer.
Does the solution meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning to create a virtual network that has a scale set that contains six virtual machines (VMs).
A monitoring solution on a different network will need access to the VMs inside the scale set.
You need to define public access to the VMs.
Solution: Design a scale set to automatically assign public IP addresses to all VMs.
Does the solution meet the goal?

A. Yes
B. No

Answer: B

New Question
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Dev, you assign the Contributor role to the Developers group.
Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation:
The Contributor role lets you manage everything except access to resources. It allows you to create and manage resources of all types, including creating Azure logic apps.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles#contributor

New Question
You have an Azure subscription that contains a policy-based virtual network gateway named GW1 and a virtual network named VNet1.
You need to ensure that you can configure a point-to-site connection from VNet1 to an on-premises computer.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Add a service endpoint to VNet1.
B. Add a public IP address space to VNet1.
C. Create a route-based virtual network gateway.
D. Reset GW1.
E. Delete GW1.
F. Add a connection to GW1.

Answer: CE

New Question
You have an Azure subscription that contains the resources shown in the following table.

Subnet1 is on VNET1. VM1 connects to Subnet1.
You plan to create a virtual network gateway on VNET1.
You need to prepare the environment for the planned virtual network gateway.
What are two ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Modify the address space used by VNET1.
B. Modify the address space used by Subnet1.
C. Create a subnet named GatewaySubnet on VNET1.
D. Create a local network gateway.
E. Delete Subnet1.

Answer: AE
New Question
A company hosts virtual machines (VMs) in an on-premises datacenter and in Azure. The on-premises and Azure-based VMs communicate using ExpressRoute.
The company wants to be able to continue regular operations if the ExpressRoute connection fails. Failover connections must use the Internet and must not require Multiprotocol Label Switching (MPLS) support.
You need to recommend a solution that provides continued operations.
What should you recommend?

A. Set up a second ExpressRoute connection.
B. Increase the bandwidth of the existing ExpressRoute connection.
C. Increase the bandwidth for the on-premises internet connection.
D. Set up a VPN connection.

Answer: D
Explanation:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/expressroute-vpn-failover

New Question
You have a web app named WebApp1 that uses an Azure App Service plan named Plan1. Plan1 uses the D1 pricing tier and has an instance count of 1.
You need to ensure that all connections to WebApp1 use HTTPS.
What should you do first?

A. Scale up Plan1.
B. Modify the connection strings for WebApp1.
C. Scale out Plan1.
D. Disable anonymous access to WebApp1.

Answer: A
Explanation:
The D1 (Shared) pricing tier does not support HTTPS.

New Question
You have an Azure subscription that contains an Azure Service Fabric cluster and a Service Fabric application named FabricApp.
You develop and package a Service Fabric application named AppPackage. AppPackage is saved in a compressed folder named AppPackage.zip.
You upload AppPackage.zip to an external store.
You need to register AppPackage in the Azure subscription.
What should you do first?

A. Run the New-ServiceFabricApplication cmdlet.
B. Repackage the application in a file named App.sfpkg.
C. Create a new Service Fabric cluster.
D. Copy AppPackage.zip to a blob storage account.

Answer: B
Explanation:
https://docs.microsoft.com/en-us/azure/service-fabric/service-fabric-package-apps#create-an-sfpkg

New Question
You develop an entertainment application where users can buy and trade virtual real estate. The application must scale to support thousands of users.
The current architecture includes five Azure virtual machines (VM) that connect to an Azure SQL Database for account information and Azure Table Storage for backend services. A user interacts with these components in the cloud at any given time.
Routing Service – Routes a request to the appropriate service and must not persist data across sessions.
Account Service – Stores and manages all account information and authentication and requires data to persist across sessions
User Service – Stores and manages all user information and requires data to persist across sessions.
Housing Network Service – Stores and manages the current real-estate economy and requires data to persist across sessions.
Trade Service – Stores and manages virtual trade between accounts and requires data to persist across sessions.
Due to volatile user traffic, a microservices solution is selected for scale agility.
You need to migrate to a distributed microservices solution on Azure Service Fabric.
Solution: Create a Service Fabric Cluster with a stateful Reliable Service for each component.
Does the solution meet the goal?

A. Yes
B. No

Answer: B

New Question
You develop an entertainment application where users can buy and trade virtual real estate. The application must scale to support thousands of users.
The current architecture includes five Azure virtual machines (VM) that connect to an Azure SQL Database for account information and Azure Table Storage for backend services. A user interacts with these components in the cloud at any given time.
Routing Service – Routes a request to the appropriate service and must not persist data across sessions.
Account Service – Stores and manages all account information and authentication and requires data to persist across sessions
User Service – Stores and manages all user information and requires data to persist across sessions.
Housing Network Service – Stores and manages the current real-estate economy and requires data to persist across sessions.
Trade Service – Stores and manages virtual trade between accounts and requires data to persist across sessions.
Due to volatile user traffic, a microservices solution is selected for scale agility.
You need to migrate to a distributed microservices solution on Azure Service Fabric.
Solution: Create a Service Fabric Cluster with a stateless Reliable Service for Routing Service. Create stateful Reliable Services for all other components.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

New Question
You develop an entertainment application where users can buy and trade virtual real estate. The application must scale to support thousands of users.
The current architecture includes five Azure virtual machines (VM) that connect to an Azure SQL Database for account information and Azure Table Storage for backend services. A user interacts with these components in the cloud at any given time.
Routing Service – Routes a request to the appropriate service and must not persist data across sessions.
Account Service – Stores and manages all account information and authentication and requires data to persist across sessions
User Service – Stores and manages all user information and requires data to persist across sessions.
Housing Network Service – Stores and manages the current real-estate economy and requires data to persist across sessions.
Trade Service – Stores and manages virtual trade between accounts and requires data to persist across sessions.
Due to volatile user traffic, a microservices solution is selected for scale agility.
You need to migrate to a distributed microservices solution on Azure Service Fabric.
Solution: Create a Service Fabric Cluster with a stateful Reliable Service for Routing Service. Deploy a Guest Executable to Service Fabric for each component.
Does the solution meet the goal?

A. Yes
B. No

Answer: B

New Question
You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?

A. an Azure Cosmos DB database
B. Azure SQL Database
C. Azure File Storage
D. Azure Data Lake Store

Answer: C
Explanation:
Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage and Azure Files by shipping disk drives to an Azure datacenter.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

New Question
You have an Azure subscription that contains the resources in the following table.

Store1 contains a file share named Data. Data contains 5,000 files.
You need to synchronize the files in Data to an on-premises server named Server1.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Download an automation script
B. Create a sync group
C. Install the Azure File Sync agent on Server1
D. Create a container instance
E. Register Server1

Answer: BCE
Explanation:
Step 1 (C): Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share Step 2 (E): Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or cluster) and the Storage Sync Service.
Step 3 (B): Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints. A server endpoint represents a path on registered server.
References:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide